A’PEXi N1 Evolution Damper Coilover Kit with Factory Upper Mounts – Toyota GR Yaris GXPA16 2020–2024

Variant Options:

• 264GT093 – Factory Upper Mount Kit with Rear Rubber-Bush Adjuster Cases
• 264GTP93 – Factory Upper Mount Kit with Rear Pillow-Ball Adjuster Cases

Product Description:

**Some Apexi Products maybe on Back order, Please allow up to 30 days if the product is out of stock at our warehouse**

**please note actual product pic may be different to the pic on the listing**

The A’PEXi N1 Evolution Damper Factory Upper Mount Kit is designed for customers who want the performance and adjustability of the N1 Evolution coilover system while retaining the vehicle’s original upper mounts.

Featuring large 46mm pistons, 25-stage damping adjustment and full-length ride-height adjustment, the N1 Evolution Damper delivers precise suspension control while the retained factory upper mounts help maintain lower noise and vibration levels for street use.

Vehicle Compatibility:

• Toyota GR Yaris GR Four
• Chassis: GXPA16
• Engine: G16E-GTS
• Compatible with RZ, RZ High Performance and RC models
• Year reference: September 2020 to March 2024
• Pre-facelift models only
• Not suitable for the updated 2024 facelift model

Available Options:

Factory Upper Mount Kit with Rear Rubber-Bush Adjuster Cases:

Supplied with standard rear rubber-bush adjuster cases for a better balance between suspension response, comfort and reduced noise.

Factory Upper Mount Kit with Rear Pillow-Ball Adjuster Cases:

Replaces the rear rubber-bush adjuster cases with spherical pillow-ball joints for more direct damper response and precise suspension movement.

Standard Suspension Specifications:

Front:

• Inverted monotube damper
• Piston diameter: 46mm
• Standard lowering amount: Approximately 30mm
• Ride-height adjustment range: Approximately +70mm to -45mm
• Spring length: 7 inches
• Spring rate: 7 kgf/mm
• Uses the factory front upper mounts

Rear:

• Upright monotube damper
• Piston diameter: 46mm
• Standard lowering amount: Approximately 30mm
• Ride-height adjustment range: Approximately +20mm to -30mm
• Spring length: 8 inches
• Spring rate: 8 kgf/mm
• Uses the factory rear upper mounts
• Choice of rubber-bush or pillow-ball adjuster cases

Kit Includes:

• Front and rear N1 Evolution dampers
• Front and rear N1 coil springs
• Required spring adjustment components
• Vehicle-specific coilover suspension kit
• Factory upper mounts are not included and must be reused

Product Features:

• Genuine A’PEXi Japan product
• Retains the original Toyota upper mounts
• Inverted front monotube dampers
• 46mm high-capacity damper pistons
• 25-stage damping-force adjustment
• Full-length ride-height adjustment
• Improved steering response and suspension control
• Reduced body roll and weight transfer
• Better noise and vibration isolation than pillow-ball upper mounts
• Rebuildable and serviceable damper construction

Rear Damping Adjustment Note:

Rear damping force is adjusted through the gap in the inner fender.

Factory Upper Mount Note:

The vehicle’s original front and rear upper mounts must be reused during installation. Inspect the factory mounts and replace any worn components before installing the coilovers.

Rear Pillow-Ball Version Note:

The rear pillow-ball adjuster case provides more direct suspension response than the standard rubber-bush version but may transmit slightly more noise and vibration into the vehicle.